Types of Rifle Scope Mounts: Know Which is Good For You

A scope mount is a tool that holds the scope on the rifle. It looks like a ring, in which a scope can easily be fixed it. The optical and weapon market has introduced many types of mount and all the types have their specific features. There is a difference in style, shape, and material in all scope mounts. Some hunters use stainless steel mount while some choose aluminum because the aluminum-based mount is water-resistant and reliable for every season.

Choosing the Rifle Scope rings, bases, and mounts is the most important step when you are going to buy your gun, rifle, or some weapon from the weapon market because the best mount will give strength to your rifle. All the guns and rifles jerk and vibrate when you make a shoot and it left a chance of felling down the scope. So, it only depends on your rifle mount that how much tightly it has gripped the scope.

We are going to discuss the types of mounts of scopes that would be helpful for you in selecting an accurate Rifle Scope Mount.

1. PICATINNY Rifle Scope Mount:

The Picatinny rifle Scope Mount is a popular and guaranteed scope holder. Picatinny has a wider and deeper slot compared to other mounts. The base is thicker than a two-piece base set due to its ejection port that is cut in the bottom of the base. The base offers a consistent spacing between the slots which generally lengthen down the whole length of the base.

Most of the shooters suggest Picatinny base mount to their rifles due to its ring, aluminum material, and reliability. It protects the scope from the rifle’s jerks and jolts. Picatinny also introduces the two-piece ring that grips the scope in a very unique way.

2. WEAVER Scope Mount:

The Weaver scope mount is one of the best mounts at the platform of weapons. Weaver style uses the wide and flat base with a crosswise recoil slot that is cut into the base which is about 7/8th of an inch. The recoil slots on the Weaver-style bases and their matching recoil lugs are wide 180 if roughly estimate.

It can very easily be adjusted onto the base and you can take your rifle anywhere along with your mounted scope. The mount rings can be very easily taken off and reattached to your rifle within some minutes.

3. LEUPOLD Scope Mount:

The Leupold Scope Mount is a very standard non-weaver-style mount system. It is also known as Redfield and Burris. Leupold is famous for its sleek design and strength and it sometimes comes in the piece and sometimes in two pieces. It mounts the long-range hunting scopes and protects the scope from jerks and jolts.

If you need to remove the scope from the rifle you need to separate the top half of the ring through a screwdriver. The system of opening the rings and then rejoin is very easy and can be done in few minutes. It cannot be handling with a single hand but with some specific tools. It works effectively and gives the best adjustment with the rifle. It is reliable for every range-finding scope or for the scope for every purpose.

4. DOVETAIL Scope Mount:

The Dovetail Scope Mount is a very unique base mount and it is similar to the dove’s tail. The Dovetail ring is jointed with two pieces and there is a long hole above the base. A Dovetail Rail and a Dovetail Base can refer to several types of sliding brackets for mounting the scopes. Dovetail also introduces a tip-off mount that allows the user to easily take on or off the sight.

The 11 mm Dovetail specifically has a 60-degree angle from its bottom while the 22 tip-off Dovetail in the US is 3/8 at the bottom and 1/2 at the top. The Dovetail scope ring is for the scope which tube is one inch, 25.4 mm. it contains repeatable alignment with the two and four scope clamp screw.

5. Tip-Off Scope Mount:

The Tip-Off Scope Mount is directly attached to the grooves built into the rifle. The tip-off scope mount is available in different sizes and styles. It is using in 22 rifles and can be attached or replace on rifles in few minutes. It is easy to use and easy to remove.

It does not allow advanced and modern technology rifles and other equipment with the rifle. It is used for medium and secondary-range shooting rifles.

6. An Integral Mount:

A lot of industrialists have come up with scopes that have an integral mount scope system that is built as a part of the scope. There is no use of rings because the gun has already a system of ring and rail upon it and the scope can easily be attached to it. The rifle has a fit of one or two rings on it as a part of the gun. The user becomes more satisfied with having an integral scope mount system and can handle the scope within few seconds.

7. An Offset Mount:

The latest scope rings fit directly above the mount. If you are using an old version gun like AR-15 or an M16 the mount position can cause the scope to finish up too on the brink of your face. This may make it very hard for you to ascertain through the lens. The recoil from the gun can also cause the scope to hit you within the eye once you shoot and cause an injury.

The solution is to use an offset mount because the button of this mount is directly connected to the receiver. The rings are located well ahead of the mount and this enables. The scope to suit the highest of the receiver but the scope attached well head of the mounting position.  You can simply fit the scope at the proper distance from your eye no matter which gun you are using.

The Offset mounts are easily available in One-piece or To-piece models that include rings at the front side. Each ring has its own offset mount that works properly.


Whether you are a hunter or a soldier the rifle scopes play an important role in your missions. As technology has changed, each tool has its own features and strength. The riflescope has a lot of features to show the distance. Through the reticle, you can zoom in and out the image and take an exact hit and after that,

it gives us true information regarding the distance between user and target. On the other hand, the mounts help the shooter in holding the scope and carrying easily.

We have discussed all the types of mounts and scopes according to the demand of a hunter and a shooter. This would be helpful in selecting the right tool for your aim.

Leave a Comment